Network settings
- Verba Support
- Kiss, Mate
System
The following table provides detailed instructions on each configuration setting:
Configuration Parameter Name | Description |
|---|---|
Server IP Address | IP address of the server. This setting is used to define the proper network interface to use by various Verba Recording System components on the network. This IP address should be accessible by other components of the system in the network. If this setting is not configured, certain services may not start at all. |
| Multi-Tenant Mode | If set to Yes, then the server will be in Multi-Tenant mode. For more information see: Multitenancy |
Recording
The following table provides detailed instructions on each configuration setting:
Configuration Parameter Name | Description |
|---|---|
Telephony Gateway IP Addresses | IP addresses of telephony gateways. The recorder services can determine the call directions based on this setting, if the recording service specific Internal Domain, Number Pattern setting is not set. |