Customed Identification Data Masking

Owned by Kiss, Mate
Sept 27, 2017
2 min read

Verba provides the ability to mask CID in the service logs and on the user interface. If CID masking is used, the technical staff can access to the GUI and to the logs without the access to sensitive information. In case of the log masking, it means replacement to a hash, so the corresponding numbers still can be found without revealing the actual numbers.

The CID masking on the GUI applies to the following:

  • Everything under the Conversations menu
  • Phone service
  • Mobile interface

and doesn't apply to the following:

  • Quality Management
  • Reporting
  • System configuration and media files

Configuring CID Masking in the Service Logs

Step 1 - Open the Verba Web Interface and go to the System \ Servers menu. Alternatively, it can be configured at the profile level, in the System \ Configuration Profiles menu.

Step 2 - Select the server or the configuration profile to configure.

Step 3 - Go to the Change Configuration Settings tab.

Step 4 - Expand the Service Logging \ Log Masking node.

Step 5 - Set the Log Masking Enabled setting to Yes.

Step 6 - Provide the regexes at the Masking Patterns setting. (one per line)

Step 7 - Provide the masking exceptions at the Masking Pattern Exceptions setting.

Step 8 - Click on the  icon.

Step 9 - A notification banner will appear on the top. Click on the click here link, so you will be redirected to the Configuration Tasks tab. Click on the Execute button in order to execute the changes.

Configuring CID Masking for the GUI

Step 1 - Open the Verba Web Interface and go to the System \ Servers menu. Alternatively, it can be configured at the profile level, in the System \ Configuration Profiles menu.

Step 2 - Select the Media Repository (or Single) server or the corresponding configuration profile to configure.

Step 3 - Go to the Change Configuration Settings tab.

Step 4 - Configure the masking settings under the Web Application \ Phone Number Masking node.

Step 5 - Click on the  icon.

Step 6 - A notification banner will appear on the top. Click on the click here link, so you will be redirected to the Configuration Tasks tab. Click on the Execute button in order to execute the changes.