Skip to end of banner
Go to start of banner

Cisco network based recording

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

This recording method utilizes special features of the Cisco Unified Communication Manager introduced in version 6.0. It integrates call recording and silent monitoring features into CUCM. If an extension is configured for recording (the configuration is available in the CUCM), the CUCM instructs the phone to send the RTP streams related to a given call, directly to the recording server utilizing the built-in bridge of the phone. The recording system is connected to the CUCM via a SIP trunk to capture the signaling messages. Additional call detail information is obtained by using a JTAPI interface.

You can also use this technology for silent monitoring, even without call recording, see Central silent monitoring utilizing RTP forking in Cisco environment.

Advantages

  • In a multi-site network, branches where few calls have to be recorded, the deployment of a recorder does not require a dedicated recording server for each remote site.
  • Theoretically, this recorder eliminates the complexity of the switching infrastructure compared to the passive recording method, because the RTP streams are sent directly to the recording server automatically.
  • Can be easily scaled by adding new recorders to the system if more capacity is required.
  • Does not require extra DSP resources from the network compared to the active (conference based) method.
  • Recording tone can be generated by the phone.
  • Encrypted calls can be recorded since CUCM 8.0

Considerations

  • Requires additional bandwidth on the network to the recording server(s).
  • Since the recording functionality is controlled by the CUCM, in case of a WAN link failure, the recording will not work at all in the branch offices (if the CUCM is in the central site).
  • Cisco SRST (Survivable Remote Site Telephony) does not support native recording.
  • Requires at least CUCM version 6.0.
  • Does not support all phone types (check the list above)
  • Requires extra capacity from the CUCM server(s) (for each recording session add 2 calls to BHCC in your dimensioning calculation).
  • Only voice calls are supported.

 "Almost" all Cisco phones support central recording 

The Verba passive, network spanning / traffic monitoring based recording engine technology supports all Cisco phones, however, the Verba central recording technology needs cooperation from software built into the Cisco phones to deliver the recording function. Not all Cisco phones support this recording mode, one requirement is the build-in-bridge technology in the phone.

Cisco maintains a detailed support matrix for RTP-forking based recording and silent monitoring: Unified CM Recording and Silent Monitoring Supported Device Matrix

You can also check the supported devices for specific CUCM versions: https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/unified/communications/system/Compatibility/CSR-Compatibility-Matrix-InteractiveHTML.html

Supported Cisco Unified Communications Manager versions: 6.x, 7.x, 8.x, 9.x,10.x, 11.x and 12.x

Supported Cisco IP phones (certain phones are only supported on the latest CUCM versions, please check the links above or run a report (see below) on your CUCM for latest information):

  • Cisco 6911

  • Cisco 6921

  • Cisco 6941

  • Cisco 6945

  • Cisco 6961

  • Cisco 7811

  • Cisco 7821

  • Cisco 7832

  • Cisco 7841

  • Cisco 7861

  • Cisco 7906

  • Cisco 7911

  • Cisco 7914 Sidecar

  • Cisco 7915 Sidecar

  • Cisco 7916 Sidecar

  • Cisco CKEM Sidecar

  • Cisco 7921

  • Cisco 7925

  • Cisco 7926

  • Cisco 7931

  • Cisco 7937

  • Cisco 7941

  • Cisco 7941G-GE

  • Cisco 7942

  • Cisco 7945

  • Cisco 7961

  • Cisco 7961G-GE

  • Cisco 7962

  • Cisco 7965

  • Cisco 7970

  • Cisco 7971

  • Cisco 7975

  • Cisco 7985

  • Cisco 8811

  • Cisco 8821

  • Cisco 8831

  • Cisco 8841

  • Cisco 8845

  • Cisco 8851

  • Cisco 8861

  • Cisco 8865

  • Cisco 8941

  • Cisco 8945

  • Cisco 8961

  • Cisco 9951

  • Cisco 9971

  • Cisco DX650

  • Cisco DX70
  • Cisco DX80

  • Cisco IP Communicator

  • Cisco Jabber for Windows

  • Cisco Jabber for Mac

  • Cisco Jabber for Android

  • Cisco Jabber for IOS

Find out what phones are supported on your system

To find out which phones are supported on your CUCM version, use the built-in reporting tool:

Step 1 Login to Cisco Unified Reporting on CUCM admin screen. 

Step 2 From System Reports select Unified CM Phone Feature List.

Step 3 Select Feature: Record. This will list all phones capable to do RTP forking.

Encrypted call recording support matrix

Cisco Unified Communications Manager 8.0 supports the recording of encrypted calls via the RTP forking based interface. The following table helps you to identify supported call scenarios regarding the encryption feature.

 Non Secure Recorded PhoneAuthenticated Recorded PhoneSecure Recorded Phone
Non Secure SIP trunk to the recorderSupportedNot supportedNot supported
Encrypted SIP trunk to the recorderSupported, but the forked RTP will not be encryptedNot supportedSupported

Possible deployment of Cisco Central call recording with RTP forking:

 

  • No labels